長度越短的桿子，桿子的仰角/Lie Angle是非常重要/Lie angle is important for the irons and wedges！~上集

球桿長度對我來說是非常重要的一環。而球桿有很多的因素和規格要在意，但不同球桿都有各個規格的優先順序之分。所以這次我來討論球桿的仰角/Lie angle。這個角度是你桿子擺在地面上，桿頭的桿頸延伸到桿身和握把的這個軸線。

現實來說，木桿和鐵桿目前的仰角設計，對多數的亞洲人使用都會讓桿頭有點翹起的狀況。這和你的手長和身高有直接關係。所以對於一些打的不錯球友，他們在鐵桿會去請工坊技師去調整桿頭頸部的仰角。讓擊球可以更加精準和方向更準確。

木桿類別已經無法去改變，也很難調整桿頭的仰角。因為桿頭為鑄造，無法硬板桿頭桿頸。但鐵桿是相對短，加上如果是鍛造鐵桿頭材質，就可以進行仰角調整。但也給大家一個正確觀念：調整仰角是固定都要去調整。因為就算桿頭調整平2度或翹2度，或是桿面角度調強2度或弱2度，桿頭都會逐漸彈回原本的角度。

所以瞭解的球友都會固定一段時間就回去找技師去調整角度。不是調一次，桿頭的仰角就是固定不變。而說到今天的重點：桿子短對於仰角就非常重要。因為當你的桿頭仰角不對，你的擊球就更容易往兩邊方向跑！

為什麼？因為你的擊球下桿，如果桿頭是翹的話，你在操控球桿就比較容易去轉動桿面。但你的桿底是和地面平行，這樣在觸球前，會比較容易吃球朝前方。因為桿底平行地面會和你的手有一個力量去制約。

本文未完，下集請點下方。

長度越短的桿子，桿子的仰角/Lie Angle是非常重要/Lie angle is important for the irons and wedges！~下集
http://www.peargolf.com/article/changduyueduandeganzi%EF%BC%8Cganzideyan...

First of all, golf club length is an extremely important to me and of course, there are other factors you need to be care about. The length is the way you can combine your body power and the tool assistance. for generating the best performance. If the length is not correct for your personal usage based on your swing and body strength, you are unable to make the good shots for sure.

To me, the lie angle is another factor for irons and wedges. Since the short length of golf clubs needs to have right lie angle for making the solid shot. Short length clubs mean your shot needed to be accurate and precise to the target, but the lie angle of the irons particularly mid and short irons are used to be fit for the lie angles.

Some of experienced and good skilled golfers use to adjust the irons and wedges lie angles for their personal use. They all know the lie will effect their impact direction and impact spot of the club face. That's why it's extremely important for golfers to know particularly the average golfers.

It's hard and unable to adjust the lie angle for wood heads with cast design head. For irons and wedges, they are made by forged stainless material that is able to adjust the lie angle easily for your play. That's why pros and single handicappers get adjusted for the lie angles as they use forged heads.

You need to be aware of the forged heads are able to adjust the face loft, face aggression/offset, and lie angles. But the key is to adjust the angles regularly as the angles will be bounced back to original for certain period of usage. Therefore, when you feel your forged head sole is unable to touch the ground flatly, it's time to go back to workshop for adjustment of lie angles.

Lie angle is important for the irons and wedges！~Part II
http://www.peargolf.com/article/changduyueduandeganzi%EF%BC%8Cganzideyan...

請尊重本站內容智慧財產權.勿未經洋梨高爾夫同意下進行非法轉載文章!如想進行文章轉載需求,請與下面電郵聯系!

本站新設新浪微博网?版：http://weibo.com/peargolf

手机版：http://weibo.cn/peargolf

大家可加入我的粉絲團,我會不定時將新的信息與活動發怖在微博與臉書，推特內.

Facebook/臉書上搜尋@peargolfcom就有洋梨高爾夫的粉絲頁。twitter/推特搜尋“@GolfPear”