桿子拆裝後的性能和安全性/How're the safety and performance of driver after pull out？~上集

現在球桿都有設計快拆的功能，讓大家可以快速更換桿身和桿頭。可以玩很多的桿身和桿頭。不像以前需要整支桿子拆掉再換其他桿頭或桿身來用。當然有沒有快拆都不會影響玩家和球友們玩其他球桿的熱情。但你心裡一定有個問題就是：桿子拆裝是否對桿子的性能和安全有影響？很多球友或技師都說沒問題！但真的沒問題嗎？

有個基本觀念大家需要瞭解，只要桿子有拆過再裝起來，不管是否原本的桿頭或桿身，都一樣會有差。差在於回饋和擊球結果。所以如果你喜歡你現在的桿子，最好別手癢去換其他桿身或桿頭來試。因為感覺是回不來，而且沒有感覺一模一樣的桿子。就算桿頭和桿身或規格都一樣，也不會有一樣的感覺的結果。

所以別相信朋友或技師說；就先拆下來裝別的桿身/桿頭來試看看，不好再裝回去。是可以裝回去但你原本熟悉的手感和結果都會不對。對技師來說，就是一個拆裝的費用，賺點工錢是小菜一碟。但對你來說損失就慘重。因為感覺和結果是回不來。而且很多技師都是組裝師，不是訂製師。

2者的差別在組裝師就是把桿子給維修、組裝和保養的工作。對於桿子特性或球友適合什麼桿子，或桿頭或桿身的特性他們基本瞭解不多也不深。而要把桿子裝回去是OK但結果和手感只能做到相似，無法複製。因為這當中有很深的學問，才能把桿子做到相似的感覺和結果。

要把桿子做到相似的手感和結果，需要考慮到這些因素和要件如下，桿頭配重、桿頭重心、桿身重心、桿身重量、桿身硬度和整體規格。這些東西需要有對材料、物理、和機械等基本原理，還要對桿頭、桿身有一定的瞭解深度和廣度。也就是說要摸很多不同的產品，需要瞭解產品的特性和回饋，才能選對產品來得到期待的手感和結果。

本文未完，下集請點下方。

桿子拆裝後的性能和安全性/How're the safety and performance of driver after pull out？~下集
http://www.peargolf.com/article/ganzichaizhuanghoudexingnengheanquanxing...

Nowadays there are many woods featured with interchangeable sleeve that is able to change the shaft and head easily by golfer. With this feature, we can simply change different shafts or heads to play and enjoy the differentiations for convenience. However, if you are the advanced golfer who likes to change different shafts or heads with your woods, you might question if I pull out the shaft and install the different shaft, is it safe to play? Will the performance be good?

Or you want to install your original shaft once you don't like the new shaft. Does the driver keep the same feedback and performance? Honestly it wouldn't be able to have the same feel and performance as you was playing before. Why? there are so many issues and elements will make the driver/wood perform and feel differently once you assemble it.

If you let the clubmaker work on your golf club's assembly, you would not get the same feedback and performance back. Since he is only capable on golf club maintenance, repairing and assembling. he is unable to know the shaft, head profiles, and further for the material, dynamics and machines.

For me I can only make the golf club back to similar feel and performance, it's unable to match the feel and performance like before. It's impossible to make it. Assembly is simple work but to make the golf club to be similar feedback and performance, it requires to know lots of issues to match the results of feel and performance.

That's why I do not suggest golfers to do frequent golf club pull out and assembly. Since the performance and feel will be different and also the risk of safety issue. If you like your current driver with the great feedback and performance, keep it without making any changes or reshaft. You can buy other one with different setup to try but don't just put out and install. It will damage the driver.

How're the safety and performance of driver after pull out？~Part II
http://www.peargolf.com/article/ganzichaizhuanghoudexingnengheanquanxing...

請尊重本站內容智慧財產權.勿未經洋梨高爾夫同意下進行非法轉載文章!如想進行文章轉載需求,請與下面電郵聯系!

本站新設新浪微博网?版：http://weibo.com/peargolf

手机版：http://weibo.cn/peargolf

大家可加入我的粉絲團,我會不定時將新的信息與活動發怖在微博與臉書，推特內.

Facebook/臉書上搜尋@peargolfcom就有洋梨高爾夫的粉絲頁。twitter/推特搜尋“@GolfPear”