平行管，還是錐形管比較好/Parallel or Taper steel shaft is good for me？~下集

平行管，還是錐形管比較好/Parallel or Taper steel shaft is good for me？~上集
http://www.peargolf.com/article/pingxingguan%EF%BC%8Chuanshizhuixingguan...

下集開始。

那錐形管呢？錐形管在外觀上就是沒有竹節設計，一管到底，桿身前端到尾巴，像錐形設計。桿身口徑接近桿頭位置是最細。錐形管主要是以Project X這類產品為主。當然True Temper和shimada/島田也有這類產品。但一樣和平行管的問題，它的重量設計低於100g的產品穩定性就不如100g以上。

我必須說基本物理特性和材料學概念。如果你要穩定性好、強度高、可以承受你的力量速度，就直接用鋼管100g以上。別去搞什麼90幾克或80幾克的鋼管桿身。用了才嫌打起來不穩或亂飛！要用100g以內，就直接去看碳纖維桿身，因為揮起來舒服、效果也好、高碳布材質強度也高。穩定性也不差。甚至比鋼管90g要猛。

錐形管的好處在於它的桿身強度要比竹節管要好。在桿身承受使用者的力量/能量，會被桿身一體的結構給壓下來。所以桿身的回饋沒有太多桿身彈力，也就是桿身變形量會相對小。好處就是可以壓制更多側旋和倒旋。穩定性相對高！

因為桿身的設計特性如此，對於使用者喜歡桿身回饋簡單、穩定和小變形量，這樣的產品就是你的白雪公主。 兩種桿身特性都不同，你在選擇上也很簡單、一翻兩瞪眼。所以你問我那個好或哪個適合我？你只要打過就知道你喜歡哪一種？但一定要選桿身重量在100g以上的產品去比較才準。

回饋絕對是這兩種桿身區隔的重要因素。桿身重量也是關鍵。100g～130g都是這兩種桿身的主力。這個區段產品很多，一定會有你適合的東西。所以我把問題再變簡單了，回饋解決後，就是重量。重量以100g為區隔點，你需要什麼或適合哪種桿身也清楚。

桿身很複雜，但從上面的分析和產品物理特性去說明，就可以讓你清楚瞭解。只要把問題一個個取出來，然後逐一分析和解決。最後的答案就在那邊！

How about the taper shaft? It's obvious that the shaft has no step on the appearance and the shaft tip size is small. The project x is the best product on taper, of course, True temper and Shimada have the taper shafts. Golfers can choose your taper through these makers. But taper and parallel are the same, the weight is key. It's better to pick the shaft weight from 100g.

Since steel shaft is strong on loading the power, if you have the power and need to deliver the consistency, you need to use the steel shaft with 100g weight for getting the best performance and consistency. Some golfers are looking for the shaft weights below 100g, that's not going to help. You need to know the iron is for accuracy, if your shaft can't deliver that for you.

If you look for lighter steel shaft below 100g,I would say it's better to select graphite shafts for below 100g products. Since graphite shafts have better material and strong feature on shaft loading the power, if you can't handle heavier shaft, you should get graphite shafts for playing the best results. I have compared with the shafts below 100g with steel shafts and graphite shafts, the graphite shafts' performance, consistency and forgiving are better than steel shafts.

The taper shaft is good on consistency that delivers less spin rates in back and side spins. Since the shaft design can load more power but the feedback is stiffer than parallel shafts. That's why lots of pros are using taper shafts such as project x for gaining the consistency and performance.

People are different as you need to try these two kinds of shafts and find the right shaft for your play. These two kinds of shaft profile is different and easy to identify. There is no exact right or wrong on steel shaft, but you need to know the fundamental of shaft knowledge and feature then get the right one for your play.

請尊重本站內容智慧財產權.勿未經洋梨高爾夫同意下進行非法轉載文章!如想進行文章轉載需求,請與下面電郵聯系!

本站新設新浪微博网?版：http://weibo.com/peargolf

手机版：http://weibo.cn/peargolf

大家可加入我的粉絲團,我會不定時將新的信息與活動發怖在微博與臉書，推特內.

Facebook/臉書上搜尋@peargolfcom就有洋梨高爾夫的粉絲頁。twitter/推特搜尋“@GolfPear”