推桿的桿頭外型、材質和推擊距離的關係/Putter head's material and design are critical for accuracy and distance？中集

推桿的桿頭外型、材質和推擊距離的關係/Putter head's material and design are critical for accuracy and distance？
http://www.peargolf.com/article/tuigandegantouwaixing%E3%80%81caizhihetu...

下集開始。

大頭設計是好瞄準。桿面往後延伸有設計一些容易瞄準的特性。也是大家喜歡的原因。加上桿頭不重，很容易上手。但這類桿頭的問題在，長推距離比較差。就算你很用力推或上桿到一半的位置距離還是有限。因為材質是鋁合金，材質密度沒有不鏽鋼高。距離效果就不如不鏽鋼。

如果你看電視選手推這類桿子也可以觀察他們長推時，其實都上桿很大，但距離還是有差。所以這類桿頭適合中短距離。會更容易去瞄準和控制距離。我自己也有不少這類推桿，但我多半會選擇這類小烏龜推桿頭材質是不鏽鋼，這樣中長距離比較容易發揮出來。同時也有好瞄準的特性。

而不鏽鋼的小烏龜桿頭也不會做的很大，至少比鋁合金要小多了。Scotty的小烏龜都是鋁合金，所以桿頭比較扁平也大。在瞄準會比較容易。而鋁合金的桿頭手感也比較軟。這也是你選購時可以觀察和注意。因為材質絕對會影響你的手感和效能效果。

所以就算是小烏龜的桿頭也有不同材質效果和手感差異。也絕不是你想的那樣簡單或選順眼好看就會適合你使用。 而如果要更詳細的特性就需要更深入的使用需求、推法和身體力學等討論了。

那傳統型推桿？這類推桿多半是不鏽鋼材質，桿頭比較小也簡單。所以對技術和操控會比較講究。也是一般球友不愛的原因。同時推到非甜蜜點的手感比較重手。就如同打鍛造推桿的感覺一樣。所以沒有練過就很難推好。

不過很多這類傳統外型推桿頭會在桿面使用坎入式不同材質來改善手感問題。不如桿面是塑膠材質，鋁合金、或其他比較軟的材質來改善手感偏硬的問題。不過這大多都是沒有推到桿面甜蜜點的問題。如果可以控制推到桿面甜蜜點或熱區比較在7成左右，其實推不鏽鋼的手感真的不錯。當然這就是熟練度的問題了。

本文未完，下集請點下方。

推桿的桿頭外型、材質和推擊距離的關係/Putter head's material and design are critical for accuracy and distance？下集
http://www.peargolf.com/article/tuigandegantouwaixing%E3%80%81caizhihetu...

Big MOI putter head design is good on your control and aiming approach. Since the whole head designs flatter and wider for golfers to aim the target without problem. Meanwhile the head material is aluminum which is light and soft advantages. Scotty cameron is good to use aluminum material on such putters.

the opposite is the putting distance is not as good as stainless putter head. That's why when you use such big and wide aluminum putter for long putting, it's always short even though you strike hard. I have various big MOI putters but I love stainless material with such wide design head. Since I can maintain the good aiming control and good distance for long put. Stainless material putter head will be smaller than aluminum one.

When you know the differences on materials, you can select the best fit for your personal use. I do not really need a soft putting feedback but I do need to control the putter and easily for aiming feature. Thus next time when you try to pick the putter for yourself, look into the putter head material to know the possible putting power you will have?

For traditional blade or one piece putter head design, it is simpler and easier to select. Since the head is made by casting or milling from stainless brick. But there are many face inserted design to make the putting feel better and soft. Stainless is harder than aluminum and it will make you feel hard when you impact the ball. That's why there is putter face inserting with other material to have better putting feel.

Personally, I prefer original material feedback. If you know how to put on the sweet-spot, the feel is great. Of course, you need to practice in order to have high sweet spot striking ratio. At the meantime, you can maintain the long putting distance for all situations. As a result, there is no perfect design putter, you have to pick the best fit for your usage and fit to work out your problems.

to be continued.....

Putter head's material and design are critical for accuracy and distance？Part III
http://www.peargolf.com/article/tuigandegantouwaixing%E3%80%81caizhihetu...

請尊重本站內容智慧財產權.勿未經洋梨高爾夫同意下進行非法轉載文章!如想進行文章轉載需求,請與下面電郵聯系!

本站新設新浪微博网?版：http://weibo.com/peargolf

手机版：http://weibo.cn/peargolf

大家可加入我的粉絲團,我會不定時將新的信息與活動發怖在微博與臉書，推特內.

Facebook/臉書上搜尋@peargolfcom就有洋梨高爾夫的粉絲頁。twitter/推特搜尋“@GolfPear”