Share |

定期去調整鐵桿角度,球才能飛得直和遠/Adjustment your iron loft and lie is key for accuracy!

定期去調整鐵桿角度,球才能飛得直和遠/Adjustment your iron loft and lie is key for accuracy!

鐵桿是和我們很重要的一組桿子。因為它多半都是要打上果嶺的桿子,所以桿子的精準度就非常重要。很多人都認為鐵桿就裝好,然後一直練到好就可以。但其實不是這麼簡單。因為鐵桿在桿頭仰角和桿面角度都是和你擊球結果有直接關係。要打得好,桿子很多細節都要去在意和設定好。

不是只有把桿子設定好你要用的長度、重量和規格就可以如魚得水。當你的鐵桿放置在地面上如果太陡峭,就必須要進行調整。同時有時候你的桿面角度,不是完全和球具廠商公布的角度一樣,所以需要去調整桿面角度,才能讓你每一支球桿的差異產生。所以有些時候,球友會覺得我的哪兩隻桿子的距離都差不多,這有可能就是桿子規格設定和桿面角度有問題導致。

一般來說,鍛造鐵桿頭比較能去調整角度,不管仰角還是桿面角度。但如果是鑄造的桿頭就很難調或不能調。因為如果硬去調整,桿頸部位很容易會裂掉、壞掉。當然如果調整個1~3度或許還可以,但角度太大就容易折壞。這是要盡力去避免。

在一些鐵桿角度調整的觀念裡,都不建議去調整角度太大,超過3度都是調整太多。但就我個人經驗來說,我自己的桿子,都給他調到10多或更多都有。只要不折壞就好。一樣打起來頭好壯壯。但一個重點就是,因為桿頭的角度設定都是固定在那邊。所以如果你一旦調整角度就要固定時間去調整。

也就是說我的7鐵的仰角都會板平約5~6度。所以每2個月我都會每一支鐵桿都測量仰角,看看角度有沒有跑回去?如果跑掉,就再扳平一些。通常東方人的鐵桿仰角都要扳平,除非你的身材高大或站姿比較直。鐵桿角度調整最重要就是讓你吃球可以更方正!這樣得到的擊球結果才能是最好(擊球位置不同也可以讓側旋減低到最小)。也是想得到更好的上果嶺率重要因素。

Irons are important tool to make the ball on the green and it needs to be accurate. Therefore, the iron's specficiation is very important for golfers to make the nice shot. It's not you keep practice to fit your irons then you can get the result better. That's the stupid way to make your golf better, you need to make the iron to fit your swing.

The iron is not just about the weight, length and swing weight, there are iron's lie angle and loft needed to be adjusted for your swing and body. Most of irons are set too upright, if you would like to contact the ball solid and square, you need to adjust the lie and loft for better striking. For example, if you have two irons with similar distance, you will need to check the loft in order to get the right distance gap.

If the lie angle is fit you, when you strike the ball on different spot of the club face, you can reduce the side spin to minimum for saving your shot. That's why you need to regularly check your irons' lie angle and loft. Technically speaking, cast iron head is unable to adjust because it's hard and easier to crack. The forged iron head is able to adjust the angles.

We used to adjust the angles within 5 degrees and for myself, I sometimes bend it over 5 degrees for my lie angle. Since if you are short, the lie angle needs to be adjust flatter to fit your body and swing. Once you adjust the lie and loft with your forged heads, you will need to regularly check the angles since it will go back to initial angles after a period of usage.

When you are serious on making your shot accurate, it's advanced golfer. The adjustments of lie angle and loft are the details for making your shot solid and correct. Once it's ajusted, you will see the differentiation and better results.

請尊重本站內容智慧財產權.勿未經洋梨高爾夫同意下進行非法轉載文章!如想進行文章轉載需求,請與下面電郵聯系!

本站新設新浪微博网?版:http://weibo.com/peargolf

手机版:http://weibo.cn/peargolf

大家可加入我的粉絲團,我會不定時將新的信息與活動發怖在微博與臉書,推特內.

Facebook/臉書上搜尋@peargolfcom就有洋梨高爾夫的粉絲頁。twitter/推特搜尋“@GolfPear”