LAB Mazz 1 推桿心得！～中集

LAB Mazz 1 推桿心得！～上集
https://www.peargolf.com/article/lab-mazz-1-tuiganxinde%EF%BC%81%EF%BD%9...

中集開始。

另外讓它回饋沒有很迷人,是桿身材質八字造成，鋼管八字就是硬，可以更換桿身來提升爽度，看自己高興。這個桿頭對於桿身的震動超明顯，硬度超過我小手負擔，導致推擊手感像按摩棒一樣。市面很多推桿選的桿身硬度都太硬了，鋼管的重量就已經重了，硬度還那樣硬，對手無縛雞之力的假日球友，推好是中樂透，沒推好是正常發揮。尤其在中短距離和快果嶺上的使用，需要以柔克剛碰球去產生滾動，桿子回饋是要命的重要。

而這樣的材質特性（重量和硬度）對短距離方向和距離掌握，往往會出現很搞笑的結果！心裡念力啟動；呼喊同組朋友快喊OK，不然肯定烙賽。當然，LAB推桿接受訂製，可選用碳纖維桿身比如Accra桿身要加150美元，或LAGP桿身要加350吧。我有到我家附近的連鎖店去試配置Accra碳纖維桿身，媽啊，感覺比鋼管回饋要再猛，一個字“硬”，觸球的桿身震動頻率從大到順暢而已，滾動表現有好，距離上一階。算了、Accra桿身和我無緣，打算用我自己的碳纖維桿身。

我改造的幾個重點在：1.推桿重量需要重新調整，把總量調輕，同時把重心轉移到桿頭，桿子的任督二脈打通，推起來就如魚得水，不讓手臂和手掌握得好像榔頭的吃力。2.握把買原廠這種帶斜角來配，沒用過，這次來嚐鮮。3.選碳纖維桿身重量不要超過100g，同時桿身重心在前端，讓桿子的重心靠前端。推起來容易掌握桿頭移動，不會來個桿頭飄移、甩尾。

桿頭拆下來，發現桿頭重量沒有想像的重。B2的桿頭重量在380g（重量級），而Mezz1才356g（輕量級而已），有點扮豬吃老虎。以現在桿頭重量都比以前要重多了，350g都上不了檯面。356g只能說一般重量。所以對桿身的選擇變得關鍵、硬度也很重要，美國這邊的桿身重量和硬度，不管是碳纖維或鋼管都設定誇張硬、重。阿是每個球友都是健身猛男，怎樣感受到觸球的feel。

考慮了幾款桿身，千挑萬選，用了LAGP鐵桿用的桿身來配，也是搞的我人仰馬翻，耗損幾隻桿身才把桿子的夢想8字給磨出來。這心酸過程裡，有一個重點和棘手的問題，就是LAB推桿的獨家技術；桿頭的桿根朝下/Lie angle balance。因為桿子的規格，桿身和握把改變後，桿根朝下狀況就沒了，所以我確實花不少時間去解決，這是技術活，非常難搞。

本文未完，下集請點下方。

LAB Mazz 1 推桿心得！～下集
https://www.peargolf.com/article/lab-mazz-1-tuiganxinde%EF%BC%81%EF%BD%9...

Honestly the Mazz 1 impact is not as impressive as B2, the feel is little harsh but I think it's caused by the shaft. The shaft is steel material and most of retail putters use heavy and stiff steel shaft to fit the putter head, it makes the impact so quick and hard for golfers to interact with the golf head. For me, putter feedback is the way to work on the mid and short distance.

If you can 100% interact with the putter head, it's hard to get the ball on the right path.That's why I used to reshaft and custom my putter specification. Of course, LAB putter allows golfers to custom the putter shafts and they have Accra and LAGP graphite putter shafts for golfers to select but there are upcharged with $150 and $350. It's up to golfers's preference.

I go to my local PGA superstore to check LAB Mezz1 putter with Accra shaft combo, it's still hard but the ball rolls better in the end of the path. That's the material advantage since graphite shaft is able to make the impact vibration to the least and also increase more spin rate for better rolling distance. I just give up to reshaft Accra shaft after the tryout.

To reshaft and custom my personal putter specification, there are some keys for this task. First is the shaft weight and flex, my putting style needs to make my arm and fingers loading as low as possible. Therefore, to select the shaft weight with 100g or below 100g is the target. The shaft also needs to be tip heavier to make the putter weight concentrate on the putter head for better control.

The second is to pick LAB putter's official putter grip in order to fit the shaft inserting head design. I haven't used that before and let's see how it works for my putting style. The Mezz 1 head weight is just 356g that is lighter than B2 380g, it makes the shaft center of gravity become very important. I select LAGP iron shaft to fit the Mezz 1 head.

Since the shaft fits my expectation and requirements on the shaft CG, the difficult part is to maintain the lie angle balance since I have changed the length, weights and shaft, the original lie angle balance is gone so I spend certain time to set up the lie angle for the new Mezz 1. I don't suggest average golfer to do such work personally, it's better to send back LAB for adjustment.

LAB Mazz 1！～Part III
https://www.peargolf.com/article/lab-mazz-1-tuiganxinde%EF%BC%81%EF%BD%9...

請尊重本站內容智慧財產權.勿未經洋梨高爾夫同意下進行非法轉載文章!如想進行文章轉載需求,請與下面電郵聯系!

本站新設新浪微博网?版：http://weibo.com/peargolf

手机版：http://weibo.cn/peargolf

大家可加入我的粉絲團,我會不定時將新的信息與活動發怖在微博與臉書，推特內.

Facebook/臉書上搜尋@peargolfcom就有洋梨高爾夫的粉絲頁。twitter/推特搜尋“@GolfPear”