推桿的桿頭外型、材質和推擊距離的關係/Putter head's material and design are critical for accuracy and distance？

推桿其實和wedge有高度的類似感。wedge有很多角度，而不同角度的使用和距離效果都會不同。但如果真要打準就不是全揮桿。這才是考驗和講究技術的地方。控制距離和方向才是最難。也是高爾夫裡最考驗大家的地方。

這就是推桿的精髓！控制力量和方向。現在很多的球場果嶺設計都是大果嶺。所以如果你球落點不好，要2推收也是非常有難度。想想如果2桿上果嶺卻來個3推，推桿就真的很掉漆。尤其下場的機會如果不多，推桿要維持一定水準是有難度。

而最為關鍵就是第一推。因為這推如果距離沒有掌握好，留下的距離還有一段，那第二推就是考驗。如果你沒有常泡球場的人，在3～6步的距離就很難推進。因為這樣的距離是多數球友比較容易遇到，也是最考驗信心度和技術的地方。

所以這就是我要討論的重點。要好的中/長推距離，你的桿頭材質和桿頭設計就很重要，因為要讓推的效果到位，光靠力量去得到，會對你在不同距離的掌握有適應困難。千萬別把推桿想成電視轉播那樣的神準。一般球友肯定無法像選手那樣可以把距離和方向掌握的恰到好處、如魚得水。

一般人要選對桿頭和桿頭材質才能事半功倍。也不是你看得順眼的桿頭設計就可以滿足你的推法。因為你不可能像選手那樣花長時間去建立推擊的技巧和經驗。

推桿桿頭如果是新型的大頭設計，多半這類的桿頭材質是鋁合金，因為重量可以比較輕，把桿頭體積就做大，可以不會得到太高的桿頭重量。這樣推起來也容易簡單多。視覺上也比較有穩定軍心的效果！

本文未完，下集請點下方

推桿的桿頭外型、材質和推擊距離的關係/Putter head's material and design are critical for accuracy and distance？中集
http://www.peargolf.com/article/tuigandegantouwaixing%E3%80%81caizhihetu...

推桿的桿頭外型、材質和推擊距離的關係/Putter head's material and design are critical for accuracy and distance？下集
http://www.peargolf.com/article/tuigandegantouwaixing%E3%80%81caizhihetu...

Putter is like wedge with highly similarity. There are various lofts for wedge to perform different distances. It is easy to perform various results from the gears, but in golf, the distance and direction controlling are the keys to deliver the best score.

In terms of putting, it's all about the controlling your power and club. Particularly nowadays golf green design is wider and bigger. For average and weekend golfers, if your ball is landed on bad spot, it's easy to get 3 putts. Then you will need to consider to use the club to help you.

The key of putting is the first put on the green. If you do not perform well with your distance, it will be tough for you to make the second put to the hole particularly you still have about 5~6 feet left. For such distance on the green, it's most challenge for average golfers and always needs two putts to finish such distance.

As a result, you need to select the right putter head design and material then you can get the better putting distance on your first put. The long and mid distances on the green is the most challenge to golfers to accomplish. If your putter is not right to deliver such distance easily, you will have hard time to make it to the hole.

If your current putter head is big with high MOI design, the head material should be Aluminum that is light and save the weight of the head. Since it's wider design that can help golfers aim the target easily with better visual.

to be continued...

Putter head's material and design are critical for accuracy and distance？Part II
http://www.peargolf.com/article/tuigandegantouwaixing%E3%80%81caizhihetu...

Putter head's material and design are critical for accuracy and distance？Part III
http://www.peargolf.com/article/tuigandegantouwaixing%E3%80%81caizhihetu...

請尊重本站內容智慧財產權.勿未經洋梨高爾夫同意下進行非法轉載文章!如想進行文章轉載需求,請與下面電郵聯系!

本站新設新浪微博网?版：http://weibo.com/peargolf

手机版：http://weibo.cn/peargolf

大家可加入我的粉絲團,我會不定時將新的信息與活動發怖在微博與臉書，推特內.

Facebook/臉書上搜尋@peargolfcom就有洋梨高爾夫的粉絲頁。twitter/推特搜尋“@GolfPear”