桿面倒旋到底是什麼/What is club face spin？~上集

高爾夫裡面有很多因素會影響你的擊球結果，而比較深入的細節就是擊球的倒旋。擊球倒旋是和你的打法，球桿有直接關係，而它的數據好壞就影響你的飛行軌跡，飛行距離和滾動距離。這也是技師會在意的因素。當然很多的球友都知道桿面角度就是會產生多少倒旋量有關，但桿面角度不是唯一會影響的東西，今天會討論桿面設計和材質。

首先，不管是木桿還是鐵桿都一樣，桿面的材質和設計都會影響到你擊球的倒旋量。就算一樣的桿面角度但不同材質也會有不同的倒旋量。同時桿面的設計包含了，凹槽和表面的粗燥度和平滑度都是會直接影響倒旋量。有些木桿標榜低倒旋，就是給速度快的球友使用，但外觀看起來也沒有什麼不同。但差異就在細節裡。

比如，這些低倒旋的桿面凹槽設計有些是雷射刻出來，並不是真的有凹槽出來。有凹槽就可以在觸球時產生更多倒旋量。另外凹槽設計不在中間的甜蜜點和熱區裡，也說明打到熱區是可以得到更少倒旋量。如果在中間位置有一些線或槽，都是增加倒旋的因素。但如果是雷射刻的話，其實不會產生太多倒旋，只是比用筆畫的要在強烈一點。

如果你用手去摸桿面就可以知道桿面的平滑和粗燥的程度。這樣就可以影響到擊球的倒旋量了。比如有些鐵桿的表面是設計比較粗燥的觸感，這就會產生更多的擊球倒旋量。如果你要打得比較高的彈道或要更好的果嶺停球能力，這就是比較好的選擇。所以別認為，桿面都是差不多，很多的設計和訴求都藏在細節裡。如果你去仔細觀察，就可以發掘這裡的秘密。

而在桿面的觸感這部分，我也做了一個實驗和測試。這樣比較可以讓大家瞭解到桿面觸感的差異，對於倒旋能力是有直接的關係。這也是球具廠商們在桿面上做的秘密。這次我是用Ping i500 7i/Project X LZ 6.0 鐵桿來進行測試。我做了一個動作，就是在桿面貼上一片擊球位置的貼紙，這樣可以去觀察桿面擊球位置。

本文未完，下集請點下方。

桿面倒旋到底是什麼/What is club face spin？~下集
http://www.peargolf.com/article/ganmiandaoxuandaodishishimowhat-club-fac...

There are many factors made up the performance and result. With clubfitting, we need to look at the details in order to find out the right problems and further to provide the suggestion. The ball spin ratio is so important for the distance, trajectory and accuracy. Today I am going to talk about the face spin rate and you can try to check what your golf club's spin ratio.

No matter it's woods, or irons, the face design and material are related with your ball spins. Even it's the same loft of the club face, with different face design and material will come out various spin results. That's why we need to know about that in order to find out what face design is good for your swing. Of course the face spin can be generated through the face groove but it's not all.

For the driver and woods, the face might have laser engraving lines or grooves. It's not actual groove but just engraving the line in order to reduce the impact spin rate. The actual groove will of course, get more spin rate but by using laser engraving, that's much less then the groove design. When you look at the driver's center, there is no groove or engraving since it's the hitting hot zone or sweet spot.

Hitting the spot on the center is key and if there is the engraving or groove on the center of the club face, it will create more spin for sure. Thus if the company wants to give you more spin rate, they can do something on the face center to make more spin without problem. The other way of making the face more spin is to create more rough feel.

If the club face is smooth, it's always the less spin or low spin design, but for average golfers with the irons, you will need more spin to make your ball landed on the green without rolling over. Now I make the experiment at indoor with foresign GC 2 launch monitor to demonstrate the face differentiation related with the spin ratio.

What is club face spin？~Part II
http://www.peargolf.com/article/ganmiandaoxuandaodishishimowhat-club-fac...

請尊重本站內容智慧財產權.勿未經洋梨高爾夫同意下進行非法轉載文章!如想進行文章轉載需求,請與下面電郵聯系!

本站新設新浪微博网?版：http://weibo.com/peargolf

手机版：http://weibo.cn/peargolf

大家可加入我的粉絲團,我會不定時將新的信息與活動發怖在微博與臉書，推特內.

Facebook/臉書上搜尋@peargolfcom就有洋梨高爾夫的粉絲頁。twitter/推特搜尋“@GolfPear”